...
Code Block | ||
---|---|---|
| ||
# mkdir -p /opt/akraino/tools # curl -L "https://nexus.akraino.org/service/local/artifactrepositories/snapshots/maven/redirect?r=snapshots&g=org.akraino.redfish&a=redfish&v=content/org/akraino/redfish/redfish/1.0.0-SNAPSHOT&e=/redfish-1.0.0-20180805.222845-10.tgz" | tar -xozv -C /opt/akraino/tools |
...
Code Block | ||
---|---|---|
| ||
# mkdir -p /opt/akraino/region # curl -L "https://nexus.akraino.org/service/local/repositories/artifactsnapshots/content/maven/redirect?r=snapshots&g=org.akraino.org/akraino/regional_controller&a=/regional_controller&v=/1.0.0-SNAPSHOT&e=/regional_controller-1.0.0-20180807.212444-5.tgz" | tar -xozv -C /opt/akraino/region |
...
SRV_NAME
is the Bare Metal Server nameSRV_OOB_IP
is the Bare Metal Server iDRAC IPSRV_IP
is the Bare Metal Server IP- Passwords are chosen for
SRV_OOB_PWD
andSRV_PWD
- All remaining
SRV_
prefixed options are adjusted as deemed appropriate - Remove all references to BUILD_WEBIP and BUILD_WEBPORT
Code Block | ||
---|---|---|
| ||
# host name for server SRV_NAME=aknode42 # server oem - Dell or HPE (case sensitive) SRV_OEM=Dell # out of band interface information for server (idrac/ilo/etc) SRV_OOB_IP=192.168.41.42 SRV_OOB_USR=root SRV_OOB_PWD=ROOT_PASSWORD # mac address of server to be used during the build - not required for Dell servers # SRV_MAC=3c:fd:fe:b8:10:60 # name of network interface used during build when ipxe.efi is booted and when os is booted # ipxe numbers ports from 0-n in pci bus order. # the netx value will depend on how many nics are in the server # and which pci device number is assigned to the slot SRV_IPXE_INF=net4 # the build interface is the nic used by the Ubuntu installed to load the OS SRV_BLD_INF=enp94s0f0 # the boot device is the device name on which the OS will be loaded SRV_BOOT_DEVICE=sdg # ipxe script to use - based on the os version and kernel to install # valid options are script-hwe-16.04.5-amd64.ipxe or script-16.04.5-amd64.ipxe SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe # template xml file to set bios and raid configuration settings SRV_BIOS_TEMPLATE=dell_r740_g14_uefi_base.xml.template SRV_BOOT_TEMPLATE=dell_r740_g14_uefi_httpboot.xml.template SRV_HTTP_BOOT_DEV=NIC.Slot.3-1-1 # VLAN to use during build and for final network configuration SRV_VLAN=41 # basic network information for dhcp config and final server network settings SRV_MTU=9000 SRV_IP=192.168.2.42 SRV_SUBNET=192.168.2.0 SRV_NETMASK=255.255.255.0 SRV_GATEWAY=192.168.2.200 SRV_DNS=192.168.2.85 SRV_DOMAIN=lab.akraino.org SRV_DNSSEARCH=lab.akraino.org SRV_NTP=ntp.ubuntu.org # root password for server being built SRV_PWD=SERVER_PASSWORD # network bond information SRV_BOND=bond0 SRV_SLAVE1=enp94s0f0 SRV_SLAVE2=enp94s0f1 |
...
The Regional Controller Node installation is now complete.
Akraino Portal Operations
Login
Visit the portal URL http://REGIONAL_NODE_IP:8080/AECPortalMgmt/
where REGIONAL_NODE_IP
is the Portal IP.
Use the following credentials:
- Username: akadmin
- Password: akraino
Upon successful login, the Akraino Portal home page will appear.