...
Code Block | ||
---|---|---|
| ||
# host name for server
SRV_NAME=aknode44
# server oem - Dell or HPE (case sensitive)
SRV_OEM=Dell
# out of band interface information for server (idrac/ilo/etc)
SRV_OOB_IP=192.168.41.44
SRV_OOB_USR=root
SRV_OOB_PWD=ROOT_PASSWORD
# mac address of server to be used during the build - not required for Dell servers
# SRV_MAC=3c:fd:fe:b8:10:60
# name of network interface used during build when ipxe.efi is booted and when os is booted
# ipxe numbers ports from 0-n in pci bus order.
# the netx value will depend on how many nics are in the server
# and which pci device number is assigned to the slot
SRV_IPXE_INF=net8
# the build interface is the nic used by the Ubuntu installed to load the OS
SRV_BLD_INF=enp135s0f0
# the boot device is the device name on which the OS will be loaded
SRV_BOOT_DEVICE=sdg
# ipxe script to use - based on the os version and kernel to install
# valid options are script-hwe-16.04.5-amd64.ipxe or script-16.04.5-amd64.ipxe
SRV_BLD_SCRIPT=script-hwe-16.04.5-amd64.ipxe
# template xml file to set bios and raid configuration settings
SRV_BIOS_TEMPLATE=dell_r740_g14_uefi_base.xml.template
SRV_BOOT_TEMPLATE=dell_r740_g14_uefi_httpboot.xml.template
SRV_HTTP_BOOT_DEV=NIC.Slot.7-1-1
# VLAN to use during build and for final network configuration
SRV_VLAN=41
# basic network information for dhcp config and final server network settings
SRV_MTU=9000
SRV_IP=192.168.2.44 #Note: This address is (the same as) the 'TARGET_SERVER_IP' defined below and in the akrainorc file#
SRV_SUBNET=192.168.2.0
SRV_NETMASK=255.255.255.0
SRV_GATEWAY=192.168.2.200
SRV_DNS=192.168.2.85
SRV_DOMAIN=lab.akraino.org
SRV_DNSSEARCH=lab.akraino.org
SRV_NTP=ntp.ubuntu.org
# root password for server being built
SRV_PWD=SERVER_PASSWORD
# network bond information
SRV_BOND=bond0
SRV_SLAVE1=enp135s0f0
SRV_SLAVE2=enp135s0f1 |
...