...
- During current test, IPsec tunnel for Initiator to Responder requires Responder to be run before Initiatior, that means the SDEWAN CNF in Hub need to be run as Responder before a edge location (with private IP) setup, and the OIP Address range need to be configured first (read from IP address manager?) and can not be updated at run time, does this be expected behavior?
- Need to check how to get the assigned OIP after the tunnel between Hub and Edge Location (with private ip) setup (through strongswan command?), this is required for Ip address manager and cluster register process.
- The registration of edge location information should be done by Admin manually or triggled automatically by EMCO's edge location registration process (assume similiar information shared)?
- Support Suppose edge location's OIP is assigned after setup and all following operation (e.g. overlay configuration) will reuse this OIP, right?
...