Page History

...

In ICN's SDWAN usages, SFC (Service Function Chain) is designed to support Corp networks to connect to external internet with security connection. The SFC includes Security VNF (e.g. firewall etc.), WAN Opt CNF and SDWAN VNF/CNF, and SDWAN module is worked as software defined router which can be used to defined the rules when connect to external internet. Below diagram shows where SDWAN module located in the whole system.

Image RemovedImage Added

Basic Technology

...

ovn4nfv-k8s-plugin is a CNI plugin based on ovn. It can work together with Multus CNI to add multiple interfaces for the pod. One of the interfaces is the Multus default interface, it could be flannel, calico, etc. The other interfaces are added by ovn4nfv-k8s-plugin according the the pod annotation. With ovn4nfv-k8s-plugin, we can create virtual network in run-time. Also we can connect the pod with the provider network, this is important for CNF.

Design Proposals

Implementation

SDWAN module is implemented as CNF instead of VNF for better performance and proving of CNF can also be effect way to deploy SDWAN

SDWAN will leverage OpenWRT for it functionality:

• Base Image: x86-generic rootfs image (http://downloads.openwrt.org/releases/18.06.4/targets/x86/generic/)
• Packages:
  • mwan3: multiple wans configuration and management
  • luci-app-mwan3: web configuration interface for mwan3
  • uhttp: web server for luci services

Deployment

Helm will be used to deploy SDWAN CNF as pod on nodes with external network connection with below parameters:

...

WAN interface definition (e.g. interface, member etc.)

...

config interface 'wan'
	option enabled '1'
	list track_ip '8.8.4.4'
	list track_ip '8.8.8.8'
	list track_ip '208.67.222.222'
	list track_ip '208.67.220.220'
	option reliability '2'
	option count '1'
	option timeout '2'
	option interval '5'
	option down '3'
	option up '8'

config member 'wan_m1_w3'
	option interface 'wan'
	option metric '1'
	option weight '3'

SDEWAN is a solution to enable SDWAN functionalities include multiple WAN link support, WAN traffic management, NAT, firewall, IPSec and Traffic shaping etc. with focus to address the challenges when applying on edge computing environment like resource limitation, edge overlays, traffic sanitization, automation and cost sensitive etc. The solution includes below components:

• SDEWAN CNF: implemented based on OpenWRT, it enhances OpenWRT Luci web interface with SDEWAN controllers to provide Restful API for network functions' configuration and control.
• SDEWAN CRD Controller: implemented as k8s CRD Controller, it manages CRDs (e.g. Firewall related CRDs, Mwan3 related CRDs and IPSec related CRDs etc.) and internally calls SDEWAN Restful API to do CNF configuration.
• Overlay Controller: provides central control of SDEWAN overlay networks by automatically configuring the SDEWAN CNFs through SDEWAN CRD controller located in edge location clusters and hub clusters.

Initial Traffic rules (e.g. policy, rule etc.)

...

config policy 'wan_only'
	list use_member 'wan_m1_w3'

config rule 'sticky_even'
	option src_ip '0.0.0.0/0.0.0.1'
	option dest_port '443'
	option proto 'tcp'
	option use_policy 'wan_only'

Runtime Configuration

SDWAN traffic rules and WAN interfaces are required to be configured at runtime through Restful API interface.

OpenWRT luci invoking mechanism:

(1) logon: POST /cgi-bin/luci with luci_username and luci_password to get sysauth Cookie

e.g. wget --post-data "luci_username=root&luci_password=" http://192.168.56.2/cgi-bin/luci/

response header will include sysauch cookie, like: "Set-Cookie: sysauth=e5b2e5c2ae0099c078bb3cb72052ed95;"

(2) Call luci http service with sysauth Cookie

e.g. wget --header="Cookie:sysauth=e5b2e5c2ae0099c078bb3cb72052ed95" http://192.168.56.2/cgi-bin/luci

Mwan3 supported services:

interface_status: GET /cgi-bin/luci/admin/status/mwan/interface_status

...

Sample response:

"interfaces":{"wan":{"running":true,"score":0,"track_ip":[{"status":"down","latency":0,"packetloss":0,"ip":"208.67.220.220"},{"status":"down","latency":0,"packetloss":0,"ip":"208.67.222.222"},{"status":"down","latency":0,"packetloss":0,"ip":"8.8.4.4"},{"status":"down","latency":0,"packetloss":0,"ip":"8.8.8.8"}],"lost":536,"status":"offline","age":5,"turn":134},"wanb6":{"running":false,"score":0,"track_ip":[],"lost":0,"status":"","age":0,"turn":0},"wanb":{"running":false,"score":0,"track_ip":[],"lost":0,"status":"","age":0,"turn":0},"wan6":{"running":false,"score":0,"track_ip":[],"lost":0,"status":"","age":0,"turn":0}},"connected":{"ipv6":["Members:","fe80::\/64"],"ipv4":["Members:","224.0.0.0\/3","192.168.56.2","127.0.0.0\/8","127.255.255.255","192.168.56.0\/24","10.0.3.0\/24","10.0.3.15","127.0.0.0","192.168.56.255","127.0.0.1","192.168.56.0","10.0.3.0","10.0.3.255"]}

...

Note: configuration for WAN's interface, member, policy and rule are supported in the web UI, but with no direct restful API available. It needs implement luci cgi plugin to provide restful API for WAN configuration. In ICN, one interface is implemented as POC to support running commands in CNF through Rest API call.

command: 

POST /cgi-bin/luci/admin/config/command

Execute commands in OpenWRT CNF

Normal Response Code: 200

Error Response Code: 400

Request:

...

SDWAN CNF Controller Implementations

The Akraino-SDEWAN-OutOfBoxNetworking.pptx describes the whole SDEWAN solution design.

ICN R3 release will focus on implementing the SDEWAN CNF and EWAN config Agent then designing the End-to-End demo with other components described in the SDEWAN solution.

Below diagrams describe CRD definition and the interaction the calling sequence of SDEWAN Conf Mgr, K8s, Sdewan CNF and Sdewan Conf Agent.

Sdewan CRD definition:

Image Removed

Calling Sequence:

Image Removed

1. System Deployment process 

• ICN deploys K8s cluster and installs kud addon: (1) Multus CNI plugin as default CNI plugin (2) ovn4nfv CNI plugin (3) Sdewan Conf Agent (sdewan-operator) as deployment
  • Note: Sdewan-operator includes (1) Sdewan Controller (monitor Sdewan CR) (2) Mwan3conf Controller (monitor Mwan3Conf CR) (3) FirewallConf Controller (monitor FirewallConf CR) (4) IPSec Controller (Monitor IpSec CR) 
• Admin (or SDEWAN Conf manager?) creates (1) Network CR (to setup OVN virtual network) (2) Provider Network CR (to setup provider network by configuration network interface on each node)

2. Create SDEWAN CNF (Pod) process

• SDEWAN conf mgr creates Mwan3Conf CR (or FirewareConf CR, IpSecConf CR), the CRs (for Mwan3Conf CR, it defined the mwan3 policy/rule) are saved in k8s etcd as K8s resources
• SDEWAN conf mgr creates Sdewan CR with below information:
  • Node: the CNF pod should be created on which node
  • Interfaces: include (1) internal network interface which connect to OVN virtual network (2) provider network interface which connect to provider network
  • Configuration: the name of pre-defined Mwan3Conf/FirewallConf/IpSecConf CR
• Sdewan Controller (running inside Sdewan Conf Agent) gets the notification of new-created Sdewan CR, call K8s API to (1) create Sdewan CNF (Pod and Service) on required Node (through NodeSelector) (2) Create ConfigMap which stores logical network interface information(used to generate /etc/config/network file in Sdewan CNF container).
  
  • Note: OpenWRT applications (such as mwan3, firewall, ipsec etc.) do not use system network interfaces (e.g. "eth0", "net1" which can be listed by "ip a") directly, instead, it uses the logical interfaces (such as "lan", "wan1" etc.), and the logical interfaces are map to real network interfaces in file /etc/config/network
• K8s creates the Sdewan CNF pod and call ovn4k8s CNI plugin to attach required network interfaces (defined in Sdewan CR) with the Pod
• When the Pod is ready(through k8s readiness check), Sdewan Controller (running inside Sdewan Conf Agent) call the rest API (through Node's FQDN) to (1) login (2) Set configuration (defined in Mwan3Conf, FirewallConf or IpSecConf) to setup initial rule inside the CNF (3) restart Mwan3 (or Firewall, IpSec) service to apply the rules in the CNF
  • Note: the configuration rules can be updated/added/deleted at runtime in Update/Delete Rule process

3. Update/Delete Rule process (use Mwan3conf as example)

• SDEWAN conf mgr updates Mwan3Conf CR (or FirewareConf CR, IpSecConf CR), the CR is saved inside K8s etcd as resource
• K8s notifies Mwan3Conf controller (run inside Sdewan Conf Agent) the CR update/delete event
• Mwan3Conf controller (run inside Sdewan Conf Agent) finds all Sdewan CRs which uses this Mwan3Conf (through Sdewan CR's Mwan3Conf property), then update the status of the found Sdewan CRs to trigger Sdewan controller's Reconcile which updates/deletes new Mwan3Conf and restarts Mwan3 service to apply the change.

4. Delete SDEWAN CNF (Pod) process

• SDEWAN conf mgr deletes Sdewan CR
• K8s notifies Sdewan controller (run inside Sdewan Conf Agent) the CR delete event
• Sdewan controller (run inside Sdewan Conf Agent) finds the Sdewan CNF owned by this deleted CR, call k8s API to delete the CNF

Timeline

...