...

•           Here user can use the private IP as of a master IPnode

         ealt-edge/ocd/infra/playbooks/var.yml

• NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )  
• MASTER_IP: Here user can use the private IP of a Controller node
•  PORTAL_IP:  If portal need to be access over internet then uncomment the  PORTAL_IP and use public IP as a PORTAL_IP otherwise portal will be accessible only on private IP default.

...

• NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )  
• MASTER_IP: Here user can use the private IP as a MASTER_IP of a controller node
•  PORTAL_IP:  If portal need to be access over internet then uncomment the  PORTAL_IP and use public IP of a controller node as a PORTAL_IP otherwise portal will be accessible only on private IP default.

• CONTROLLER_MASTER_IP:   Private IP of the Controller master which is used for Edge to connectnode.

          ealt-edge/ocd/infra/playbooks/muno-config/edge/hosts-muno-edge

...

• NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )  
• MASTER_IP: Here user can use the private IP of a edge node
• OCD_IP: Here user can use the private IP of a Controller NodeNode which is used for Edge to connect

          ealt-edge/ocd/infra/playbooks/password-var.yml

...

                  * Here user can put the public IP in center, edge, ocdhost node.

Installing Mode : EALTEdge using Ansible-Playbooks

...

Currently the verification is manually done. 

In muno mode

1- Login to the Center Node and check whether K8S cluster is installed.

Components and Services running in CENTER Controller Node

Components and Services running EDGE Node

Image Removed

Image Removed

2- Login to the Center Node and check whether K8S cluster is installed in muno mode.

Image Removed

Components and Services running EDGE Node

Image Removed

Image Added

Deploy Application in EALTEdge

...

             UploadConfig File: upload sandboxenvkubeconfig file

        4.2   Click on Workspace -> Create Project -> Application Integration -> StartImage RemovedDemonstration of application Development & Deployment

          - Go to Application Integration

Image Removed

              - Provide App Name, Version, Provider, Workload Type, Architecture, Industry, Type.  Application Development
              - Upload Icon, provide Description. And click on confirm.

Image Removed

      4.3.  Now click on Deployment Test.

            -     Upload Docker images directly from the portal by clicking on Upload App Image. 

1. docker save -o <path-to-save>/<repo-name>.tar <repo-name>:<tag> 

                  After that you can take tar file from path and upload image.

                  Or, directly push Docker images to Harbor repo (takes lesser time, preferred). Following command for pushing an image in Harbor: 

...

Image Removed

            -     Click next, upload deployment yaml file now.

Image Removed

            -     After config upload, click next and click start deployment

            -     After Deployment is successful, click on Release Recourses

Image Removed

            Note:

            -     While Deployment test if any error happens, open ATP portal (https://ip:30094) in another tab of the browser, sign in,  come back to the developer portal and re run deployment test 

            -     gitee.com/edgegallery/applications repo provides A lot of applications with their logo, deployment YAML & user guides

      3.4.  Now click on Application Release   link - https://www.youtube.com/watch?v=AjQNG5d3p84&t=23s

             Upload file for Application Description

Image Removed

             Click save config

Image Removed

 Application Deployment
             Click Next Step, click Start Test, scroll down to find & click the Start Test button, then confirm. Once the testing is complete click on Next Step

Image Removed

Image Removed

             click publish to publish an application to AppStore. Go to https://<IP>:30091 and App Warehouse to confirm that the application is successfully ported.Image Removed link - https://www.youtube.com/watch?v=PbxKpslVnmc&t=31s

Developer  Guide and Troubleshooting

...

References

Demonstration of application Development & Deployment

Application Development
link - https://www.youtube.com/watch?v=AjQNG5d3p84&t=23s

...

Definitions, acronyms and abbreviations

...