...
Note: For Development environment two nodes is sufficient, where one node plays a dual role of One-Click Deployment Node and MECM Node with other as MEC Host.
Figure: EALTEdge Deployment Architecture
...
For Virtual Deployment minimum three2 Virtual machines(OCD and Center node can be deploy on same VM or in different VMs), following are the virtual machines and their usage
...
ealt-edge/ocd/infra/playbooks/hosts-aio
ealt-edge/ocd/infra/playbooks/var.yml
For EALT-EDGE stack:
ealt-edge/ocd/infra/playbooks/ealt-inventory.ini
...
Repo Password: Harbor12345Harbor@edge(harbor password)
Vendor: vendor(any general name)
2. Login to Developer Portal 2. log in to MECM Portal https://ip:3009230093
2.1. Add sandbox env to deploy application before publish Add k8s node:
Click on Edge Nodes ->New Rgistration
Click System ->Host Management ->Add Host
System: k8s
. Name: edge1(any general name)
System: k8s Lcmip: sandbox ip(for testing purpose can provide edge ip, if no sandbox env) IP: edge public IP
mecHost: sandbox ip(for testing purpose can provide edge ip, if no sandbox env) Location: Select from the drop-down
Port: 31252 Architecture: x86
Protocol: https Architecture: X86 Capabilities: select none
Status: Normal Port Range: leave as it is App LCM: Select edge IP from the drop-down box
Address: Bangalore App Rule MGR: Select edge IP from the drop-down box
UploadConfig File: upload sandboxenvkubeconfig file 2.2.2 Click on Workspace -> Create Project -> Application Integration -> Start Download /root/.kube/config file from edge node
- Provide App Name, Version, Provider, Workload Type, Architecture, Industry, Type. - Upload Icon, provide Description. And click on confirm.
And click on Upload config file to upload.
3. log in to harbor Portal https://ip:443
2.3. Now click on Deployment Test. 3.1. Add three new projects
3.2. Those three projects' names are appstore, developer, and mecm. And select access level to the public.
- Upload Docker images directly from portal by clicking on Upload App Image
3.3. Final page will look like the below screenshot.
4. log in to Developer Portal https://ip:30092
Or, directly push Docker images to Harbor repo (takes lesser time, preferred) - Click next, upload deployment yaml file now. 4.1. Add sandbox env to deploy application before publishing
- After config upload, click Click System ->Host Management ->Add Host
next and click start deployment - . After Deployment is success, click on Release Recourses
Note Name: general name
System: k8s
- While Deployment test if any error happens, open ATP portal (https://ip:30094) in another tab of browser, sing in, come back to developer portal and re run deployment test Lcmip: sandbox ip(for testing purpose can provide edge ip, if no sandbox env)
- gitee.com/edgegallery/applications repo provides, A lot of applications with their logo, deployment yaml mecHost: sandbox ip(for testing purpose can provide edge ip, if no sandbox env)
Port: 30204 & user guides 2.4. Now click on Application Release
Upload file for Application Description Protocol: https
Click save config, click Next Step, click Start Test, scroll down to find & click Start Test button, click Next Step, click publish to publish application to appstore. 3. Login to MECM Portal https://ip:30093 Architecture: X86
3.1. Add k8s node: Status: Normal
Port Range: leave as it is
Address: Bangalore
Click on Edge Nodes ->New Rgistration UploadConfig File: upload sandboxenvkubeconfig file
4.2 Click on Workspace -> Create Project -> Application Integration -> Start
- Go to Application Integration
- Provide App Name, Version, Provider, Workload Type, Architecture, Industry, Type.
- Upload Icon, provide Description. And click on confirm.
4.3. Now click on Deployment Test.
- Upload Docker images directly from the portal by clicking on Upload App Image.
- docker save -o <path-to-save>/<repo-name>.tar <repo-name>:<tag>
After that you can take tar file from path and upload image.
Or, directly push Docker images to Harbor repo (takes lesser time, preferred). Following command for pushing an image in Harbor:
- cat /etc/docker/daemon.json (execute this command in Edge gallery installed machine, to get an IP)
- docker tag <repo-name>:<tag> <IP>/developer/<repo-name>:<tag>
- docker push <IP>/developer/<repo-name>:<tag>
- VM: k8s Click next, upload deployment yaml file now.
- Name: edge1 After config upload, click next and click start deployment
- After Deployment is successful, click on Release Recourses
IP: edge public ip Location: select from drop down Note:
- Address: yantaWhile Deployment test if any error happens, open ATP portal (https://ip:30094) in another tab of the browser, sign in, come back to the developer portal and re run deployment test
- Coordinates: 116.39,39.90 gitee.com/edgegallery/applications repo provides A lot of applications with their logo, deployment YAML & user guides
3.4. Now click on Application Release
Architecture: x86 Upload file for Application Description
Capabilities: select none Click save config
MEPM: select applcm node from dropdown Click Next Step, click Start Test, scroll down to find & click the Start Test button, then confirm. Once the testing is complete click on Next Step
3.2. Download /root/.kube/config file from edge node
And click on Upload config file to upload.
click publish to publish an application to AppStore. Go to https://<IP>:30091 and App Warehouse to confirm that the application is successfully ported.
Developer Guide and Troubleshooting
...