...

Note: ELIOT IotGateway Blueprint Deployment has been tested on Cloud VM and is not tested on Bare-Metal Environment. Though, theoretically deployment should work in bare metal, provided hardware and software prerequisites are met. Kindly refer R5 ELIOT R6 - Test Documentation of Edge Lightweight IotGateway (ELIOT)IoT Gateway Test Document to get details on the tested deployment.

...

2. Setup password-less login from ocd to center and ocd to edge.

...

-

If you get authentication issue you can change the permission

# Open file: vi /etc/ssh/sshd_config

...

- sudo systemctl restart ssh.service # sshpass

For EdgeGallery AIO mode:

Login from ocd to center and ocd to edge in a single node.

sshpass -p <password> ssh-copy-id -p <ssh-port> -o StrictHostKeyChecking=no root@<node_

...

ip>

For EdgeGallery Muno mode:

Login from ocd to center in a controller node

sshpass -p <password> ssh-copy-id -p <ssh-port> -o StrictHostKeyChecking=no root@<controller-node_ip>
sshpass -p <password> ssh-copy-id -p <ssh-port> -o StrictHostKeyChecking=no root@<edge-node_ip>

Login from ocd to edge in a edge node

sshpass -p <password> ssh-copy-id -p <ssh-port> -o StrictHostKeyChecking=no root@<controller-node_ip>
sshpass -p <password> ssh-copy-id -p <ssh-port> -o StrictHostKeyChecking=no root@<edge-node_ip>

3. These command are require in both AIO and MUNO(Controller and Edge Node ) mode.

cp -p /etc/passwd /etc/passwd.bkp

cp -p /etc/group /etc/group.bkp

id ubuntu

groupmod -g 600 ubuntu

id ubuntu

4. Review and Change Parameters

For EdgeGallery AIO Mode:

...

3. cp -p /etc/passwd /etc/passwd.bkp

cp -p /etc/group /etc/group.bkp

id ubuntu

groupmod -g 600 ubuntu

id ubuntu

4. Review and Change Parameters

For EdgeGallery MUNO Mode

eliot/blueprints/iotgateway/playbooks/muno-config/controller/hosts-muno-controller

eliot/blueprints/iotgateway/playbooks/muno-config/controller/var.yml

eliot/blueprints/iotgateway/playbooks/muno-config/edge/hosts-muno-controller

eliot/blueprints/iotgateway/playbooks/muno-config/edge/var.yml

For EdgeGallery AIO Mode

eliot/blueprints/iotgateway/playbooks/hosts-aio Image Removed

Here user can use the private IP af a node

eliot/blueprints/iotgateway/playbooks/var.yml Image Removed Image Added

eliot eliot/blueprints/iotgateway/playbooks/password-var.yml

Image Removed

For ELIOT stack:

eliot/blueprints/iotgateway/playbooks/eliot-inventory.ini

Image Removed

Installing Mode : ELIOT using Ansible-Playbooks

1. git clone the eliot repo, to download the software to install the ELIOT Environment.

root@akraino-mec-0001:~# git clone "https://gerrit.akraino.org/r/eliot"

2. go to the below directory

root@akraino-mec-0001:~# cd eliot/blueprints/iotgateway/playbooks

3. Modify the Configuration File : eliot-inventory.ini with the details of Master and Edge/IotGateway Nodes.

root@akraino-mec-0002:~# vi eliot-inventory.ini

For Edge Gallery installation:

Select one of Multi Node Inventory Mode (MUNO-Mode) or All in one mode (AIO mode) and install it.=

MUNO-Mode:

Execute the below command:

NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )
MASTER_IP: Here user can use the private IP of a node
PORTAL_IP: If portal need to be access over internet then uncomment the PORTAL_IP and use public IP as a PORTAL_IP otherwise portal will be accessible only on private IP default.

Image Added

eliot/blueprints/iotgateway/playbooks/password-var.yml

All passwords must include capital letters, lowercase letters, numbers and special characters and whose length must be no less than 8 characters. Also there should be no special characters & in it. Otherwise, the deployment will failed because of these simple passwords.
A sample password could be "Harbor@12345"

Image Added

For EdgeGallery MUNO Mode:

cd eliot/blueprints/iotgateway/playbooksansible-playbook -i muno-config/muno-config/controller/hosts-muno-controller eliot-eg-muno-controller.yml --extra-vars "operation=install" -e "ansible_user=root"

ansible-playbook -i muno-config/edge/hosts-muno-edge eliot-eg-muno-edge.yml --extra-vars "operation=install" -e "ansible_user=root"

For AIO mode:

Execute the below command

cd ealt-edge/ocd/infra/playbooks

root@akraino-mec-0001:~#ansible-playbook eliot-eg-aio-latest.yml -i hosts-aio --extra-vars "operation=install" -e "ansible_user=root"

FOR ELIOT Stack:

Execute the below command
Setup environment -

root@akraino-mec-0001:~# ansible-playbook eliot-all.yml -i eliot-inventory.ini --extra-vars "operation=install"

Once the execution is completed in console will see prompt "ELIOTEdge Environment Installed , Components Install ELIOT Master and EDGE Nodes Successfully"

Snapshot Deployment Overview

N/A

Special Requirements for Virtual Deployments

N/A

Install Jump Host

N/A

Verifying the Setup - VM's

N/A

Upstream Deployment Guide

Upstream Deployment Key Features

N/A

Special Requirements for Upstream Deployments

N/A

Scenarios and Deploy Settings for Upstream Deployments

N/A

Including Upstream Patches with Deployment

N/A

Running

N/A

Interacting with Containerized Overcloud

N/A

Verifying the Setup

Verifying ELIOT IotGateway Deployment

Currently the verification is manually done.

Login to the Master Node and check whether K8S cluster is installed.
Check the below mentioned components and services are running as Pods / Services in Kubernetes cluster
1. Edge Gallery
2. grafana
3. rabbitmq
4. cadvisor
5. edgex
6. Hawkbit
7. opc-ua
Login to Edge Host and verify the worker node setup

Components and Services running in ELIOT Master Node

Components and Services running ELIOT IotGateway/ Edge Node

Deploy Application in ELIOT

Login to MECM Portal https://ip:30093

1.1 click on Systems ->App LCM ->New Registration

Name: Applcm(any general name)

IP: applcm"public ip"

Port: 30204

Image Removed

1.2. Click on Systems ->App Rule -> New Registration

Name: Apprule(any general name)

IP: applcm"public ip"

Port: 30206

Image Removed

1.3. click on Systems ->App Store ->New Registration

App Store Name: appstore(any general name)

IP: Appstore public ip

Port: 30099

Appstore Repo: {HarborIP:443}(192.168.1.1:443)

Repo Name: appstore(any general name)

Repo Username: admin(harbor user name)

Repo Password: Harbor12345(harbor password)

Vendor: vendor(any general name)

Image Removed

2. Login to Developer Portal https://ip:30092

2.1. Add sandbox env to deploy application before publish

Click System ->Host Management ->Add Host

Image Removed

Name: general name

System: k8s

Lcmip: sandbox ip(for testing purpose can provide edge ip, if no sandbox env)

mecHost: sandbox ip(for testing purpose can provide edge ip, if no sandbox env)

Port: 31252

Protocol: https

Architecture: X86

Status: Normal

Port Range: leave as it is

Address: Bangalore

UploadConfig File: upload sandboxenvkubeconfig file

2.2 Click on Workspace -> Create Project -> Application Integration -> Start

- Provide App Name, Version, Provider, Workload Type, Architecture, Industry, Type.

- Upload Icon, provide Description. And click on confirm.

Image Removed

2.3. Now click on Deployment Test.

- Upload Docker images directly from portal by clicking on Upload App Image

Or, directly push Docker images to Harbor repo (takes lesser time, preferred)

- Click next, upload deployment yaml file now.

- After config upload, click next and click start deployment

- After Deployment is success, click on Release Recourses

Note:

- While Deployment test if any error happens, open ATP portal (https://ip:30094) in another tab of browser, sing in, come back to developer portal and re run deployment test

- gitee.com/edgegallery/applications repo provides, A lot of applications with their logo, deployment yaml & user guides

2.4. Now click on Application Release

Upload file for Application Description

Here user can use the private IP as a master IP of a Controller node

Image Added

eliot/blueprints/iotgateway/playbooks/muno-config/controller/var.yml

NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )
MASTER_IP: Here user can use the private IP 0f a controller node
PORTAL_IP: If portal need to be access over internet then uncomment the PORTAL_IP and use public IP as a PORTAL_IP otherwise portal will be accessible only on private IP default.
CONTROLLER_MASTER_IP: Uncomment the PORTAL_IP and use private IP of a the Controller node

Image Added

eliot/blueprints/iotgateway/playbooks/muno-config/edge/hosts-muno-edge

Here user can use the private IP as a master IP of a Edge node

Image Added

eliot/blueprints/iotgateway/playbooks/muno-config/edge/var.yml

NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )
MASTER_IP: Here user can use the private IP of a edge node
OCD_IP: Here user can use the private IP of a Controller Node which is used for Edge to connect

Image Added

eliot/blueprints/iotgateway/playbooks/password-var.yml

All passwords must include capital letters, lowercase letters, numbers and special characters and whose length must be no less than 8 characters. Also there should be no special characters & in it. Otherwise, the deployment will failed because of these simple passwords.
A sample password could be "Harbor@12345"

Image Added

For ELIOT stack:

eliot/blueprints/iotgateway/playbooks/eliot-inventory.ini

Here user can put the public IP in center, edge, ocdhost node.

Image Added

Installing Mode : ELIOT using Ansible-Playbooks

1. git clone the eliot repo, to download the software to install the ELIOT Environment.

root@akraino-mec-0001:~# git clone "https://gerrit.akraino.org/r/eliot"

2. go to the below directory

root@akraino-mec-0001:~# cd eliot/blueprints/iotgateway/playbooks

3. Modify the Configuration File : eliot-inventory.ini with the details of Master and Edge/IotGateway Nodes.

root@akraino-mec-0002:~# vi eliot-inventory.ini

For Edge Gallery installation:

Select one of Multi Node Inventory Mode (MUNO-Mode) or All in one mode (AIO mode) and install it.

MUNO-Mode:

Execute the below command:

cd eliot/blueprints/iotgateway/playbooks

ansible-playbook -i muno-config/controller/hosts-muno-controller eliot-eg-muno-controller.yml --extra-vars "operation=install" -e "ansible_user=root"

ansible-playbook -i muno-config/edge/hosts-muno-edge eliot-eg-muno-edge.yml --extra-vars "operation=install" -e "ansible_user=root"

For AIO mode:

Execute the below command

cd ealt-edge/ocd/infra/playbooks

ansible-playbook eliot-eg-aio-latest.yml -i hosts-aio --extra-vars "operation=install" -e "ansible_user=root"

FOR ELIOT Stack:

Execute the below command
Setup environment -

ansible-playbook eliot-all.yml -i eliot-inventory.ini --extra-vars "operation=install"

Once the execution is completed in console will see prompt "ELIOTEdge Environment Installed , Components Install ELIOT Master and EDGE Nodes Successfully"