...
- The Bare Metal Server iDRAC/iLO interface and bonded production interfaces must be reachable from the Build Server.
- The Build Server and Bare Metal Server primary networks must have one of the following characteristics:
- The networks must be located on the same L2 network, or
- DHCP requests must be forwarded from the Bare Metal Server primary network interface to the Build Server (e.g., via a DHCP relay/helper).
- The switch configuration for the network bond of the Bare Metal Server primary interfaces must be set to bring up the bond on the first interface prior to lacp completing negotiation.
- For Junos OS this option is typically called force-up and should be set on the first interface in the bond.
- For Arista, this option is typically called lacp fallback.
- Please refer to your network switch documentation to determine the correct configuration.
Here are logical views of two supported topologies as examples:
Specific steps to achieve this connectivity are beyond the scope of this guide. However, some verification can be performed.
...