...
The Target RC has multiple physical ND VLAN interfaces. The Build Server uses different interfaces during the different stages of its creation of a RC on the Target Server. A very detailed description of the entire networking setup can be found in the Network Architecture section of this release documentation <INSERT LINK>. In addition the networking configuration with example vlaues as used in the validation labs is contained in the Validation Labs section of this release documentation Unicycle OVS-DPDK Validation HW, Networking and IP plan.
The Build Server must have IP connectivity to the Target Server's dedicated BMC port using ports 80 (http) <is 80 actually used?> and 443 (https) in order to issue Redfish commands to configure the Target Server's BIOS settings. The Target Server's BMC IP address is denoted as <SRV_OOB_IP> in this guide. The Target Server's BMC must be manually preconfigured with the <SRV_OOB_IP> address.
...
During the final stage of the installation a UI will have been installed on the newly deployed RC. This UI will be used to subsequently deploy all Rover and Unicycle pods to edge locations. The RC's portal can be opened in Chrome via the portal URL http://TARGET_SERVER_IP:8080/AECPortalMgmt/ where REGIONALTARGET_NODESERVER_IP is the RC's 'host' IP address. Note: IE or Edge browsers may not currently work with this UI.
...