...
Pre-Installation Requirements
Recommended Hardware Requirements
Processor model | 2*Kunpeng 920 processor |
RAM | 16*DDR4-2933 |
Storage | 10*2.5 inch SAS/SATA/SSD or 8*2.5 inch NVMe SSD |
Network | 1 onboard network card, each card supports 4*GE port or 4*10GE port or 4*25GE port |
Power Supply | Power 100~240V AC，240V DC |
Scale | 447 mm x 490 mm x 86.1 mm |
ARM Server satisfies the Arm Server Ready certified.
...
Virtual Deployment Guide
- Standard Deployment Overview
- Snapshot Deployment Overview
- Special Requirements for Virtual Deployments
- Install Jump Host
- Verifying the Setup - VMs
Upstream Deployment Guide
- Upstream Deployment Key Features
- Special Requirements for Upstream Deployments
- Scenarios and Deploy Settings for Upstream Deployments
- Including Upstream Patches with Deployment
- Running
- Interacting with Containerized Overcloud
Verifying the Setup as defined the Akraino validation feature project plus any additional testing specific to the blue print
Developer Guide and Troubleshooting
Utilization of Images
Post-deployment Configuration
Debugging Failures
Reporting a Bug
Uninstall Guide
The following method only uses snap to install Anbox. If you want to delete Anbox from the system, you must first delete snap.
Attention：Remove all data stored in the snapshot from the system:
$ snap remove anbox
After deleting the snapshot, you must also delete the installed kernel modules (if installed):
$ sudo apt install ppa-purge
$ sudo ppa-purge ppa:morphis/anbox-support
Upon completion, Anbox will be removed from your system.
Troubleshooting
If kernels modules successfully loaded, service is running fine, and yet Anbox won't launch with
Application manager service is not running yet. Check for the messageNo space left on device - Failed to enter cgroupin/var/lib/anbox/logs/container.log, you may be running into see this issue: https://github.com/lxc/lxd/issues/6257
...