Page History

Nokia OpenEdge Servers

Login to the controller-1 BMC ip using a web browser (https://xxx.xxx.xxx.xxx).

Go to Settings/Media Redirection/General Settings.

Select the Remote Media Support.

Select the Mount CD/DVD.

Type the NFS server IP address.

Type the NFS share path.

Select the nfs in Share Type for CD/DVD.

Click Save.

Click OK to restart the VMedia Service.

Go to Settings/Media Redirection/Remote Images.

Select the image for the first CD/DVD device from the drop-down list.

Click the play button to map the image with the server’s CD/DVD devices. The Redirection Status changes to Started when the image redirection succeeds.

Go to Control & Maintain/Remote Control to open the Remote Console.

Reset the server.

Press F11 to boot menu and select boot from CD/DVD device.

HP Servers

Login to iLo for Controller 1 for the installation

Go to Remote Console & Media

Scroll to HTML 5 Console

• URL

 http://XXX.XXX.XXX.XX:XXXX/REC_RC1/install.iso -> Virtual Media URL →

• NFS 

< IP to connect for NFS file system>/<file path>/install.iso

Check “Boot on Next Reset” -> Insert Media

Reset System

Dell Servers

Go to Configuration/Virtual Media

Scroll down to Remote File Share and enter the url for ISO into the Image File Path field.

• URL:

http://XXX.XXX.XXX.XX:XXXX/REC_RC1/install.iso

• NFS

< IP to connect for NFS file system>/<file path>/install.iso>

 Select Connect.

Open Virtual Console, and go to Boot

Set Boot Action to Virtual CD/DVS/ISO

Then Power/Reset System

Ampere Servers

Darrin Vallis

Download install.iso from the TA Repository. Use release build 273 or later (DTV: Need to verify release). Note 1/24/20: Waiting for Jenkins build to incorporate Hawk hardware detector. Use rec_install_testbuild.iso for Hawk based openEDGE sleds.

Mount install.iso as NFS share on Linux file system in same network as REC cluster

Download and unzip ampere_virtual_media_v2.zip

Edit mount_media.sh and dismount_media.sh. Set IPMI_LOCATION to IP address of Node 1 BMC, NFS_IP to IP of NFS server, ISO_LOCATION to NFS path for install.iso

Run mount_media.sh. This will connect install.iso as a CDROM on Node 1

Boot Node 1 into BIOS. Force boot from CD by selecting "Save & Exit" tab on BIOS, Boot Override → CDDROM

REC Telco Appliance will begin installation

See instructions below

Marvell Servers

@ Carl Yang <carlyang@marvell.com>