...
Frequently Asked Questions
How to setup IPMI?
First, make sure the IPMI tool is installed in your servers, if not install them using apt install ipmitool
Then, check for the ipmitool information of each servers using the command "ipmitool lan print 1"
If the above command doesn't show the IPMI information, then setup the IPMI static IP address using following instruction
- Mostly easy way to set up IPMI topology in your lab setup is by using IPMI tool.
- Using IPMI tool - https://www.thomas-krenn.com/en/wiki/Configuring_IPMI_under_Linux_using_ipmitool
- IPMI information can be considered during the BIOS setting as well.
BMC web console url is not working?
...