...
| Test | Robot case exists | Docker for AMD64 | Docker for ARM64 | Tested on x86_64/AMD64 | Tested on ARM64 | Integrated with Bluval |
|---|---|---|---|---|---|---|
| Redfish | Ok | Ok | Ok | Ran on OpenEdge hw (failures to be investigated) | NA | Waiting for testing to complete |
| LTP | Ok | Ok | Ok | Needs to be installed by the test setup phase | Works | |
| k8s | Ok | Ok | Ok | Works with k3s, Rover and REC | Works with IEC | Works |
| OpenStack (Tempest) | Ok | Ok | Ok | Works with Airship | https://gerrit.akraino.org/r/c/validation/+/1602 |
January 8, 2020
- Presentation and demo to TSC
- Want to have the "push logs to Nexus from Jenkins" patch working before presentation
- Check again next week
- The new repo was approved on December 19th by the TSC
- Need a record of the TSC meeting where this was approved
- Easiest is to have the topic on the agenda again tomorrow
- Naga is leaving the project by the end of this week
- Will remain as a contributor with a new email address (INFO.yaml needs to be updated)
- Security tests (Lynis and Vuls) may not work on ARM, will check this next
- Discussion about installation logs and UI
- The Regional Controller is the only "official" (at least for TA) installer, so it only can tell if installation worked
- Could also enhance deployment logs so that they inform some UI when an installation has worked
- Community lab is free to use for all!
December 18, 2019
- New repo request went to wrong place, have tried again
- Security tests:
- Lynis - merged
- Vouls Vuls - aim to have it for review this week. It is not support
- The Jenkins job in CI-Integration is now pushing results from Enea lab to Nexus daily from the LF Jenkins master
- Release 2.0.1 has been tagged
- Plan is to automate this in the future so after new tags, the Docker images are created automatically
...