Ampere ServersDarrin Vallis Download install.iso from the TA Repository. Use release 273 or later (DTV: Need to verify release) Mount install.iso as NFS share on Linux file system in same network as REC cluster Download and unzip ampere_virtual_media_v2.zip Edit mount_media.sh and dismount_media.sh. Set IPMI_LOCATION to IP address of Node 1 BMC, NFS_IP to IP of NFS server, ISO_LOCATION to NFS path for install.iso Run mount_media.sh. This will connect install.iso as a CDROM on Node 1 Boot Node 1 into BIOS. Force boot from CD by selecting "Save & Exit" tab on BIOS, Boot Override → CDDROM REC Telco Appliance will begin installation Shows graphic installer with Akraino Edge Stack logo Answer installer questions Upload user_config.yaml to Node 1 with scp Start installer Installation runs for 1-3 hours There is no status indicator on screen. Monitor progress with tail -f /srv/deployment/log/cm.log root@IPSee instructions below |