Table of Contents |
---|
@MIGU 补充应用安装相关部分
@huawei 补充控制面相关部分
Introduction
...
This document describes steps required to deploy a sample environment and test for CFN (Computing Force Network) Ubiquitous Computing Force Scheduling Blueprint.
Deployment Architecture
Control plane: one k8s cluster is deployed in private lab.
Traffic plane: two K8s clusters are deployed in private lab.
Pre-Installation Requirements
...
kubeadm-1.23.7
kubectl-1.23.7
N/A
- Database Perequisites
schema scripts: N/A
...
0 Environmental description
Two centos At least two CentOS machines are required, one as the master node and the other as the worker node. The installed k8s version is 1.23.7.
There will be a comment like #master in front of each bash command, which is used to indicate which type of machine the command is used on. If there is no comment, the bash command needs to be executed on both types of machines
This document contains the operation and execution process, you can compare the screenshots of the document during the installation process.
1 Basic environment preparation
...
Preparing the basic environment to ensure the normal execution of subsequent operations.
1.1 Confirm your OS
Confirm that the operating system of the current machine is CentOS 7 .
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
cat /etc/redhat-release |
...
If the name is long, it is recommended to use a combination of letters and dashes, such as "aa-bb-cc", here directly set to master and worker1.
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master hostnamectl set-hostname master hostnamectl # worker hostnamectl set-hostname worker1 hostnamectl |
...
The changed host name needs to take effect after reboot.
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
reboot |
1.3 Set address mappinmapping
Set address mapping, and test the network.
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
cat <<EOF>> /etc/hosts ${YOUR IP} master ${YOUR IP} worker1 EOF ping master ping worker1 |
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
rm -rf /etc/yum.repos.d/* ;wget ftp://ftp.rhce.cc/k8s/* -P /etc/yum.repos.d/ ls /etc/yum.repos.d/ |
Execute screenshot
...
1.6 Set iptables
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
cat <<EOF> /etc/sysctl.d/k8s.conf net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 net.ipv4.ip_forward = 1 EOF sysctl -p /etc/sysctl.d/k8s.conf |
Execute screenshot
1.7 Make sure the time zone and time are correct
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
timedatectl set-timezone Asia/Shanghai systemctl restart rsyslog |
Execute screenshot
2 Install docker
...
The main content is to install docker-ce, and configure the cgroup driver of docker as systemd, confirm the driver.
2.1 Uninstall old docker
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
yum -y remove docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-engine docker-ce docker-ce-cli |
Execute screenshot
2.2 Install docker
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
yum -y install docker-ce |
Execute screenshot
2.3 Set docker to boot and confirm docker status
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
systemctl enable docker systemctl start docker systemctl status docker |
Execute screenshot
2.4 Configure the driver of docker's cgroup
...
Check the current configuration, if it is the system in the figure below, skip the follow-up and go directly to the third section
Execute screenshot
If it is cgroupfs, add the following statement
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
systemctl daemon-reload && systemctl restart docker docker info | grep -i cgroup |
3 Install k8s basic components
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
yum list installed | grep kube |
Execute screenshot
3.2 Install kubelet kubeadm kubectl version 1.23.7
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
yum -y install kubelet-1.23.7 kubeadm-1.23.7 kubectl-1.23.7 |
Execute screenshot
3.3 Verify installation
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubelet --version kubeadm version kubectl version |
Execute screenshot
4 Initialize the master
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master kubeadm config images list --kubernetes-version=v1.23.7 |sed -e 's/^/docker pull /g' -e 's#k8s.gcr.io#registry.aliyuncs.com/google_containers#g' |sh -x docker pull registry.aliyuncs.com/google_containers/coredns:v1.8.6 docker images |
Execute screenshot
Please make sure that the above 7 images have been pulled down
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master kubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version=v1.23.7 --pod-network-cidr=10.10.0.0/16 |
Execute screenshot
Let kubectl take effect
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config kubectl get po -A |
Execute screenshot
We can see that the coredns is not ready, so we need configure the network plugin
...
Check the current kernel version and boot sequence
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master awk -F\' '$1=="menuentry " {print i++ " : " $2}' /boot/grub2/grub.cfg |
Cilium install
uname -sr |
If current version ist not satisfied, you need update kernel
Cilium install
Execute commandExecute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master curl -L --remote-name-all https://github.com/cilium/cilium-cli/releases/latest/download/cilium-linux-amd64.tar.gz tar -zxvf cilium-linux-amd64.tar.gz mv cilium /usr/local/bin/ cilium version cilium install kubectl get po -A |
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master kubeadm token create --print-join-command |
Execute screenshot
5.2 Join the master node
...
When you have the join statement, copy it and execute it on the worker node, you can see
Execute screenshot
Note that if an error occurs and you need to re-init, you need to execute the following statement first to ensure that kubeadm is re-executed normally
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
# master kubectl get nodes |
Execute screenshot
6 Install karmada
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl get po -A |
Execute screenshot
7 Propagate a deployment by Karmada
...
Before propagating a deployment, make sure the worker cluster is already working properly And get the latest config currently running
In the following steps, we are going to propagate a deployment by Karmada. We use the installation of nginx as an example
...
Here we add the working node cluster through push mode
It is worth noting that /root/.kube/config is Kubernetes host config and the /etc/karmada/karmada-apiserver.config is karmada-apiserver config
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl karmada --kubeconfig /etc/karmada/karmada-apiserver.config join worker-cluster ${YOUR MEMBER NAME} --cluster-kubeconfig=prod${YOUR MEMBER CONFIG PATH} --cluster-context=prod |
7.2 Create nginx deployment in Karmada.
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl get po -A |
...
${YOUR CLUSTER CONTEXT} |
Here is example command for your information: kubectl karmada --kubeconfig /etc/karmada/karmada-apiserver.config join member1 --cluster-kubeconfig=/root/.kube/member1-config --cluster-context=kubernetes-admin@kubernetes
--kubeconfig specifies the Karmada's
kubeconfig
file and the CLI- --cluster-kubeconfig
specifies the member's config. Generally, it can be obtained from the worker cluster in "/root/.kube/config"
--cluster-context the value of current-context from --cluster-kubeconfig
If you want unjoin the member cluster, just change the join to unjoin: kubectl karmada --kubeconfig /etc/karmada/karmada-apiserver.config unjoin member2 --cluster-kubeconfig=/root/.kube/192.168.30.2_config --cluster-context=kubernetes-admin@kubernetes
check the members of karmada
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl --kubeconfig /etc/karmada/karmada-apiserver.config get clusters |
7.2 Create nginx deployment in Karmada
deployment.yaml are obtained through here https://github.com/karmada-io/karmada/tree/master/samples/nginx
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl create -f /root/sample/nginx/deployment.yaml --kubeconfig /etc/karmada/karmada-apiserver.config
kubectl get deployment --kubeconfig /etc/karmada/karmada-apiserver.config |
7.3 Create PropagationPolicy that will propagate nginx to member cluster
propagationpolicy.yaml are obtained through here https://github.com/karmada-io/karmada/tree/master/samples/nginx
Execute command
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl get po -A |
...
create -f /root/sample/nginx/propagationpolicy.yaml --kubeconfig /etc/karmada/karmada-apiserver.config |
7.4 Check the deployment status from Karmada
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
kubectl get po -A --kubeconfig /root/.kube/member1-config kubectl get po --kubeconfig /root/.kube/member2-config |
Reference
https://lazytoki.cn/index.php/archives/4/
...
https://zhuanlan.zhihu.com/p/368879345
https://docs.docker.com/engine/install/centos/
...
Uninstall Guide
Troubleshooting
1. Network problem: the working cluster uses the default communication mode of calico, and the access between nodes is blocked; After many attempts, calico vxlan is feasible and flannel is feasible at present;
2. Disaster recovery scenario scheduling, test scenario 2, requires the karmada control plane to install the deschedule component;
Maintenance
Blue Print Package Maintenance
- Software maintenance: N/A
- Hardware maintenance:N/A
...