You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

There has been extensive work to port and validate SEBA running on ARM hardware, as described here.

The work for porting SEBA on ARM has started even before the SEBA Blueprint was made part of the Telco Appliance Blueprint Family and it did not target the TA Platform at that time. For this reason, the information captured in this page is not dependent or heavily tailored to using the TA Platform. However, since this is the only effort for porting SEBA on ARM architecture, and the work happens almost entirely in the context of Akraino, it made a lot of sense to have the information under the SEBA Blueprint wiki page.

SEBA for ARM Architecture Documentation

Please refer to the SEBA Blueprint Architecture Document for a high level architectural view of the SEBA Blueprint.

For a broader, more general view of the SEBA architecture, HW/SW requirements and usecases, please visit the upstream resources:

The same priniciples and guidelines apply for running SEBA on ARM as well, with the mention that running on ARM equipped HW generally requires a more in-depth knowledge of the HW and SW platform.

SEBA ARM Hardware

Servers built with ARM Processors have been around for quite some time and there are a few different offerings on the market. However, for the effort of porting SEBA on ARM, the work has focused primarily on using just a few of them, based on commercial availability, costs and performance:


  • No labels